Remington Chainsaw Carburetor Adjustment

Tuning up a Remington Chainsaw Carb is 123 Easy Here’s How. Simple concise tune up adjustment for a Reminton chainsaw


A List of Chainsaw Carburetors

Stihl Chainsaw Carburetor Tuning High and Low Screw

Fine Tuning Screw L Low Speed Fuel Adjustment Screw The screw with the {L} marking is the Low Speed screw. Set the low speed fuel adjustment. Slowly turn in the screw until the engine surges or starves for fuel. Make a mental note of the position of the screwdriver slot. Now slowly turn the adjustment […]

Stihl Chainsaw Troubleshooting Guide

4. If saw runs but, not on gas in tank, check gas tank for old gas. Empty old gas and, look for syrup in the bottom of the tank, if present clean thoroughly. Use carburetor cleaner, gas and a brush that can reach in and not melt. Try to start with fresh gas mix.

Stihl Chainsaw Carburetor Troubleshooting Chart

Hard Starting, Will not idle, Rich Idle

Polishing and Seasoning The Ultimate Cast Iron Skillet

I’ve been experimenting with polishing my cast iron skillet. I started with a 10 inch cast iron frying pan. I polish the inside bottom of the pan with an orbital sander start with 30, 50, 80, 120 and , 220 grit. I used 30 sanding disks and 4 hours of time. once the pan was […]


Read The Caption on the first photo

Stihl Chainsaw Carburetor Adjustment

Tunning up a Stihl Chainsaw Carb is 123 Easy. Here’s How. Simple concise tune up adjustment for a Stihl, Poulan, Homelite or Husqvarna chainsaw carburetor

Carburetor Settings for a Stihl TS CutQuik Line Saw

Tuning a Stihl Line Saw is easy. Heres how

Carburetor Settings for a Stihl Blower and Vacuum

Tuning a Stihl Blower is Easy. Heres How!

Next »